Serie di inclinometri Biassiali con uscita dati in tensione in corrente RS485 ecc.
| Output Interface | RS232/RS485/CAN/CANOpen/Switch | 0.5~4.5VDC/4~20mA |
| Measurement range | ±5°?±10°?±15°?±30°?±45°?±60°?±90°?±180°?0~360° | |
| Accuracy | ±0.07°@-15~50? | ±0.15°@-15~50? |
| Non-linearity | ±0.03° | ±0.05° |
| Resolution | 0.002° | 0.005° |
| Repeatability | ±0.02° | ±0.05° |
| Offset | ±0.02° | ±0.05° |
| Cross-axis sensitivity | ±0.2%FS | ±0.2%FS |
| Measuring axis | 1 or 2 axis?±180°and 0~360°measurement range single axis only? | |
| Bandwidth | Default 3Hz?5Hz?10Hz available | |
| Response time | 5ms?no filtering? | 10ms?no filtering? |
| Refresh rate | Default 5Hz?max. 50Hz | 50Hz |
| Cold start warming time | Less than 60s | |
| Interface features | RS232: 9600bps (adjustable) 8 data bits 1start bit 1 stop bit | Voltage output: 0.5~4.5VDC; Internal resistance 0.3?; Drive current (max.) 15mA |
| RS485: 9600bps (adjustable) 8 data bits 1start bit 1 stop bit No matched resistanc | ||
| CAN2.0: according to ISO11898-2standard 40k~1MBit/s baud rate adaptive standard frame and extended frame format No matched resistance | ||
| CANOpen: according to DS301 standard40k~1MBit/s baud rate No matched resistance | Current output:4~20mA; Internal resistance 50M?; load impedance 150~650? | |
| Switch output: Darlington OC output loadwith 1A @9?36VDC alarm point can be pre-set in factory | ||
| Power consumption | RS232/RS485 Output: 9~36VDCcurrent ?50mA@24VDC | 16~36VDC current?30mA (no-load?@24VDC |
| CAN/CANOpen Output: 9~36VDCcurrent?80mA@24VDC | ||
| Switch output: 9~36VDCcurrent?50mA?no-load?@24VDC | ||
| Operation temperature range | -40?85? | |
| Storage temperature range | -40?85? | |
| EMC | According to EN 61000/GBT17626 | |
| Insolation | ?100M? | |
| MTBF | 10 years | |
| Shock | 100g@11ms three-axis half- sine | |
| Vibration | 8grms?20?2000Hz | |
| Protection | IP67 | |
| Connector | M12 5-Pin socket | |
| Weight | ?200g (no connector or cable) | |
