NOVATEL – Avviso di EOL per i sistemi SPAN-IGM-A1/S1 e IMU-IGM-A1/S1 NOVATEL

External Notice: NovAtel Announces End of Life for SPAN-IGM-A1/S1 and IMU-IGM-A1/S1

NovAtel Inc. is announcing the End of Life of the following products:

• SPN-IGM-A1-XXX-XXX-XXX
• SPN-IGM-S1-XXX-XXX-XXX
• IMU-IGM-XX

These products will be available for order until:

• February 28, 2020 (or until inventory has been depleted)

Shipments may be scheduled for no later than:

• July 31, 2020

NovAtel will continue to support and repair these products until:

• November 30, 2022

For a complete list of affected part numbers and the associated replacement part numbers, please refer
to the table below:

Notes:
For a complete listing of NovAtel products at end of life, including the expiration of support and repair for
those products, please refer to the discontinued products list on the NovAtel website at
www.novatel.com/products/discontinued-products

Per maggiori informazioni contattaci:

https://www.lunitek.it/contatta-sensoristica-e-acquisizione-dati/

Questo articolo fornisce un’introduzione alla nuova Serie MTi-600 per gli utenti che stanno migrando dalla Serie MTi-10. Sebbene i protocolli di comunicazione e la maggior parte delle funzionalità siano condivisi tra le due serie, ci sono alcune differenze importanti che devono essere considerate durante la migrazione.

Algorithm – Filter profiles

As with the MTi-20 and MTi-30, the MTi-620, MTi-630, and MTi-670 also feature a range of filter profiles to choose from. The MTi 600-series include new filter profiles as well as some “legacy” filter profiles.

Although the naming and behavior are not identical, the available options cover typically all applications.

Below a table is shown which makes suggestions on comparable filter profiles when migrating from the MTi 10-series to the MTi 600-series.  Although the MTi-620 and MTi-630 support a “General” filter profile that can be used to reproduce “legacy” filter profiles, we recommend new users to start testing the Robust and Responsive filter profiles.

In contrary to the AHS filter option in the MTi 10-series, the AHS option is now incorporated in the heading behavior for the MTi 600-series, e.g.: VRUAHS. Active Heading Stabilization is a new feature designed for use with VRU products and therefore it will not be available for the MTi-670.

For the MTi-670 three different filter profiles are available: General, GeneralNoBaro and GeneralMag. These filter profiles were already available for the MTi-7 and the MTi-G-710.

A complete description of the filter profiles available for the MTi 600-series can be found in chapter 4 of the MTi 600-series Datasheet.

Hardware – Mounting

The footprint of the MTi 600-series is significantly smaller than that of the MTi 10-series. Hence, the mounting holes are different, see Figure 1 and Figure 2:

For more information on the hardware integration of the MTi 600-series, please refer to the MTi 600-series Hardware integration manual.

Hardware – Communication interfaces

The MTi 10-series provided support for 5 different communication interfaces: USB, RS232, RS485, RS422 and UART (OEM only). The MTi 600-series additionally supports a CAN interface, but a direct USB, RS485, and RS422 interface are no longer available.

A USB connection can still easily be created by using the Development Kit board, or by using the UART to USB converter that comes with it. The Development Kit board also provides access to an RS422 interface. The user can create his/her converter following the design of the Development Kit.

Hardware – Electrical interface

The MTi 600-series has a 16-pins connector, whereas the MTi 10-series connector only features 9 pins. These additional pins on the MTi 600-series are used among other things, for the GNSS input, CAN bus and UART interface.

Table 2 shows a conversion for the pins of the MTi 10-series to the MTi 600-series:

More information on the pinout and electrical specifications are available in the MTi 600-series Hardware integration manual.

Software

The MTi 600-series supports the public source XDA and MTDATA2 as does the MTi 10-series. There are however a few changes, which are highlighted below:

These messages are documented in the MT Low-Level Communication Protocol Documentation and the supplied Doxygen in the SDK.

The MTi 600-series are fully supported by MT Software Suite versions 2019.2 and up. Older versions of MT Manager, the MT SDK, and the Magnetic Field Mapper may not be fully compatible with the MTi 600-series. We advise all users to always download and install the latest version of the MT Software Suite, available at https://www.xsens.com/software-downloads.

Per maggiori informazioni contattaci:

https://www.lunitek.it/contatta-sensoristica-e-acquisizione-dati/

Introduzione alla Xsens MTi serie 600

Sei interessato alla Serie MTi 600 DK e a come impostare questo kit di sviluppo? Guarda l’unboxing video adesso!

La Serie MTi 600 ha l’eccezionale qualità che contraddistingue i prodotti Xsens ed è perfettamente “bilanciata” con le sue dimensioni ridotte, prestazioni di livello industriale e prezzi competitivi.

Alcuni punti salienti della Serie MTi 600:

• Ampia scelta di interfacce, incluso il supporto CAN Bus
• Supporto ricevitore GNSS esterno e compatibilità NMEA
• Supporto tecnico mondiale 24 ore su 24, 7 giorni su 7

Per maggiori informazioni contattaci:

https://www.lunitek.it/contatta-sensoristica-e-acquisizione-dati/

V10 ANALYSIS SOFTWARE – FULL RELEASE

SCARICA LA VERSIONE v10

New features include:

• Fully automatic synchronization of GoPro video with Race Technology data – based on GPS (GPS enabled GoPro required)
• GoPro video handling including exports now 10x faster
• GoPro video file joining application included
• Cloud-based storage options for all of your data
• Tighter integration with our RT LIVE online data logger
• Greatly simplified variable management
• Enhanced CAN support in all applications
• Improved map overlays in Analysis
• Major updates to the DL1 firmware
• and much more….!

Please Note: V10 software doesn’t include any support for the legacy VIDEO4 or the DL1 MK2 or MK1 products. Software is compatible with Windows 7, 8 and 10.

Per maggiori informazioni contattaci: https://www.lunitek.it/contatta-sensoristica-e-acquisizione-dati/

PwrPak7-E2 & PwrPak7D-E2

PwrPak7-E2 and PwrPak7D-E2 are the newest and most advanced additions to the PwrPak7 family of enclosures

• PwrPak7-E2: Single antenna connection integrated with an OEM7700 board and an internal Epson G370N IMU
• PwrPak7D-E2: Dual antenna connection providing heading solution. Integrated with an OEM7720 board and the internal Epson G370N IMU

The PwrPak7D-E2 enclosure integrates the advanced Epson G370 IMU with NovAtel’s popular dual antenna receiver board OEM7720, delivering a GNSS-INS solution for robust heading and positioning with improved performance and higher INS data rate at 200Hz.  When combined with SPAN Land Vehicle, positioning and attitude performance is extended further into GNSS outages.

Both the PwrPak7-E2 and PwrPak7D-E2 include NovAtel’s Interference Tookit with advanced interference detection and mitigation features applicable to all stages of your integration journey.  With 16GB onboard storage, users can capture data up to 5 days.  A web user interface accessible through ethernet or WiFi allows for quick and easy configuration and control.

OEM-IMU-EG370N

• OEM-IMU-EG370N: Advanced Epson G370N IMU with higher performance and 200Hz INS data rate

Per maggiori informazioni contattaci: https://www.lunitek.it/contatta-sensoristica-e-acquisizione-dati/

GoPro Only Software

Professional Data Analysis Software for GoPro Users

• Professional race data analysis software for GoPro users – analyse the data and video to find out where to go faster
• Uses GoPro’s own embedded GPS data for comprehensive race analysis. Lap/sector times, track map, speed, braking points, cornering grip and much more…
• Supports all current GoPro video formats, from super fast LRV mode to UHD 4K

SCARICA LA VERSIONE GRATUITA DI PROVA PER 30 GG!!!

Per maggiori informazioni contattaci: https://www.lunitek.it/contatta-sensoristica-e-acquisizione-dati/